How to root Vonino Ego QS QS450 for Free

Rooting your Vonino Ego QS (QS450) is simple however, be aware that rooting your Vonino Ego QS (QS450) will void your device’s warranty. The benefit of using the Kingo rooting software below to root your Vonino Ego QS (QS450) is that it will not delete any pre-installed apps. In addition to this, you can “unroot” your Vonino Ego QS (QS450) at any time using this software.

Now root your Vonino Ego QS (QS450) following the guide below.

Preparing to root your Vonino Ego QS (QS450) :

  1. Download Android Root and install it on your computer.
  2. Make sure your Vonino Ego QS (QS450) is powered on and has at least 50% battery level

 Vonino Ego QS (QS450) rooting - connect device screen


1. Double-click the desktop icon to launch Vonino Ego QS (QS450) Android Rooting software.

You will then see the see the initial phone ‘not connected’ screen.

2. Next, connect your Vonino Ego QS (QS450) to the computer via the USB cable.

If this is the first time you’ve connected your Vonino Ego QS (QS450) to your PC then you will have to wait till the USB drivers are installed before the Vonino Ego QS (QS450) Rooting software will detect the phone (the original USB cable is recommended).

3. Next, enable USB debugging mode on your Vonino Ego QS (QS450) .

If you have already done this, skip this step and move on. If not, please follow the instructions as shown on the software interface according to your Android version. Alternatively, the video below may be able to help you enable debugging mode on your Vonino Ego QS (QS450) . [relatedYouTubeVideos relation=”keywords” terms=”enable usb debugging Vonino Ego QS (QS450) ” exact=”false” max=”1″ showVideoTitle=”true” lang=”en” orderBy=”relevance” start=”0″ width=450 height=250]

4. Note: Read the notifications carefully before proceeding.

There are many advantages and dis-advantages to rooting your Vonino Ego QS (QS450) . Please ensure that you know what your are doing and only continue after you’ve read the notifications and aware if the inadvertent consequences.

5. Click ROOT to start the rooting process when you are ready.

It will take 3 to 5 minutes to complete the phone rooting process. Once you’ve started it, do not move, touch, unplug USB cable or perform any operation on your phone!

 Vonino Ego QS (QS450) rooting completed

6. ROOT Succeeded! Click Finish and wait for phone to reboot.

Your Vonino Ego QS (QS450) is now successfully rooted and you need to click Finish to reboot it in order for the changes to take full effect. Do not touch, move or unplug it until it reboots.Check your device and you’ll find a SuperSU icon, which is the mark of a successful ROOT.