How to root Huawei Y320T for Free

Rooting your Huawei Y320T is simple however, be aware that rooting your Huawei Y320T will void your device’s warranty. The benefit of using the Kingo rooting software below to root your Huawei Y320T is that it will not delete any pre-installed apps. In addition to this, you can “unroot” your Huawei Y320T at any time using this software.

Now root your Huawei Y320T following the guide below.

Preparing to root your Huawei Y320T :

  1. Download Android Root and install it on your computer.
  2. Make sure your Huawei Y320T is powered on and has at least 50% battery level

 Huawei Y320T  rooting - connect device screen


1. Double-click the desktop icon to launch Huawei Y320T Android Rooting software.

You will then see the see the initial phone ‘not connected’ screen.


2. Next, connect your Huawei Y320T to the computer via the USB cable.

If this is the first time you’ve connected your Huawei Y320T to your PC then you will have to wait till the USB drivers are installed before the Huawei Y320T Rooting software will detect the phone (the original USB cable is recommended).

3. Next, enable USB debugging mode on your Huawei Y320T .

If you have already done this, skip this step and move on. If not, please follow the instructions as shown on the software interface according to your Android version. Alternatively, the video below may be able to help you enable debugging mode on your Huawei Y320T . [relatedYouTubeVideos relation=”keywords” terms=”enable usb debugging Huawei Y320T ” exact=”false” max=”1″ showVideoTitle=”true” lang=”en” orderBy=”relevance” start=”0″ width=450 height=250]

4. Note: Read the notifications carefully before proceeding.

There are many advantages and dis-advantages to rooting your Huawei Y320T . Please ensure that you know what your are doing and only continue after you’ve read the notifications and aware if the inadvertent consequences.

5. Click ROOT to start the rooting process when you are ready.

It will take 3 to 5 minutes to complete the phone rooting process. Once you’ve started it, do not move, touch, unplug USB cable or perform any operation on your phone!

 Huawei Y320T  rooting completed

6. ROOT Succeeded! Click Finish and wait for phone to reboot.

Your Huawei Y320T is now successfully rooted and you need to click Finish to reboot it in order for the changes to take full effect. Do not touch, move or unplug it until it reboots.Check your device and you’ll find a SuperSU icon, which is the mark of a successful ROOT.



Leave a Reply

Your email address will not be published. Required fields are marked *